![]() |
Aktif Konular Üye Listesi Takvim Arama |
| BİLGİSAYARLI MAKİNE İMALÂTI DALI | |
| |
|
| Yazar | Mesaj |
|
sinangulec
Yönetici
SİNGUL Kayıt Tarihi: 01-Ocak-2006 Konum: Çorum Gönderilenler: 197
|
![]() Konu: Güngör Makina Eğitim CNC Tezgahı HakkındaGönderim Zamanı: 04-Mart-2009 Saat 13:48 |
|
26-27-28 Şubat 2009 Tarihinde İzmir'de güngör Makina tarafından 90 adet Makina okul öğretmenlerini eğitim Semineri verildi. Okulumuzdan Erdoğan Anaç ve Süleyman Akman bu eğitimleri başarıyla tamamladılar. Bugünlerde tezgahın hazırlık ayarları ve CNC derslerini bu tezgahla nasıl işleriz şeklinde çalışmalar içindeyiz. Diğer okullardan makinacı arkadaşların CNC tezgahla iligli sorunları ve görüşlerini bu başlık altında paylaşmalarını bekliyoruz.
Tezgahla ilgili web sitesi ;
Herkese kolay gelsin diyoruz.
Sinan Güleç
Makina Öğretmeni
|
|
|
|
|
erdoganac
Yeni Üye
Kayıt Tarihi: 13-Ekim-2006 Konum: Çorum Gönderilenler: 5
|
![]() Gönderim Zamanı: 07-Mart-2009 Saat 10:49 |
|
Hocam, kurs güzel oldu. Ama biraz organizasyonda eksiklikler oldu. Yine de hazırlayanlara teşekkür ederiz. Bu arada 200 'e yakın makina teknolojileri alanı öğretmeni ile görüşmekden çok memnun olduk. Konu ile ilgili haber www.erdogananac.com |
|
|
|
|
udud
Yeni Üye
Kayıt Tarihi: 25-Ağustos-2008 Gönderilenler: 2
|
![]() Gönderim Zamanı: 24-Nisan-2009 Saat 09:50 |
|
hocam,5 yıldızlı otelde yapılan kurs nasıl olur anlamadım.Kursa katılmak için bölümde 7 arkadaş müracat ettik.çok şükür,idare ile çalışmalarını iyi yürüten ekip gitti.sonuç olarak gelen tezgah şu an atelyede istirahate çekilmiş durumda saygılar... |
|
|
|
|
udud
Yeni Üye
Kayıt Tarihi: 25-Ağustos-2008 Gönderilenler: 2
|
![]() Gönderim Zamanı: 24-Nisan-2009 Saat 10:07 |
|
hocam,kursa katılamayan biri olarak yorum yapamayacağım..Fakat kursa gitmek için bölüm içinde yapılan seçim hususunda görüşlerimi belirtmek istiyorum.5 yıldızlı otelde yapılacak olan kurs için bölümdeki 8 arkadaş olarak müracat ettik.yapılan elemeler sonucunda 2+1 (müdür yardımcısı) olarak kursa katılımı sağladık.saolsun giden arkadaşlarda 5 yaprakılık döküman getirdiler.incelip, anlamaya çalışıyoruz.kısaca atelyede çalışma yapılırsa bilgilendireleceğiz diye beklemekteyiz...saygılar... |
|
|
|
|
nadir_akin
Yeni Üye
Kayıt Tarihi: 07-Ekim-2009 Konum: İzmir Gönderilenler: 2
|
![]() Gönderim Zamanı: 07-Ekim-2009 Saat 22:32 |
|
biz çalıştırdık hocam gayet iyi çalışıyo...
|
|
|
|
|
nadir_akin
Yeni Üye
Kayıt Tarihi: 07-Ekim-2009 Konum: İzmir Gönderilenler: 2
|
![]() Gönderim Zamanı: 07-Ekim-2009 Saat 22:33 |
|
biz çalıştırdık gayet düzgün çalışıyo hocam...
|
|
|
|
|
cnccihakan
Yeni Üye
Kayıt Tarihi: 28-Aralık-2009 Gönderilenler: 1
|
![]() Gönderim Zamanı: 28-Aralık-2009 Saat 17:58 |
|
Bundan uzun zaman önce PC ler daha yeni yeni piyasaya çıkıyorlardı. Aman allahım biz bunları kullanabilecekmiyiz veya öğrenebilecekmiyiz diye soruyorduk kendi kendimize.Kurcalaya kurcalaya önce kullanmayı öğrendik. sonra söküp taktık çalışma prensiplerini öğrendik. Şimdilerde bilgisayar kullanmayanımız yok gibi. Yok gibi diyorum çünkü bazen eğitimlerde (Ki buna sizlerde şahitsiniz) Enter tuşu nedir hocam diye soran öğretmenlerim oldu. Sizler gibi sabırla bende görevimi yaptım ve enter tuşundan başladım anlatmaya. Eğitim amaçlı cnc tezgahların konsepti 1990 lı yılların başında Alman eğitim sisteminde yaygınlaşmaya başladı. Onlar da büyük endüstriyel tezgahların okullarda zor kullanıldığını anlamışlar. Maksatları imalat yapmak değil cnc operatörleri yetiştirmekmiş. Bu konsepte uygun olarak bizde benzer ürünleri geliştirdik. Hatta mekanik aksamını o kadar basit tuttuk ki tıpkı bilgisayar kullanmaya başladığımız dönemlerde nasıl söküp takıp kendimiz müdahale edebiliyorsak bu makinalardada aynı tecrübeyi yapabiliriz diye. Ama bu zaman alacak. Okullara kuruluma gittiğimde her zaman ilk sözüm şu olmuştur. Lütfen korkmadan kurcalayın bu makinayı. Biliyorum ki çok aşırı bir yüke maruz kalmadıkça mekanik olarak arıza riski yoktur. Programsal olarakta SL firmasını tercih ettik. Bunun nedeni çok uzun yıllardır sadece bu işi yapıyor olmalarıdır. Yani eğitim modüllü cnc software yazılımları. Elinizdeki software ler iddaa ediyorum ki benzersizdir. Katı model 3d simulasyonlu olarak makina süren cnc yazılımlar daha yeni yeni çıkmaya başladı. Bizler Siemens gibi firmalarında ürünlerini kullanıyoruz imalatlarımızda. En son 802 d sl üniteli prototip imal ettik. Çok açık söylüyorum ki gerçekten iyi bir ünite olmasına karşılık simulasyon özelliği maalesef Sl de olduğu gibi gelişmemiştir. Gelişen modelleri ise daha yeni yeni piyasaya çıkmakta olan shop turn ve shop mill sistemlerdir.
Eğitim konusunda bende sizin gibi düşünmekteyim. Gerçekten çok kalabalıktı. Ancak bunun nedeni kesinlikle bizden kaynaklanmamıştır. Eğitimi 2 ye bölmek ve daha uygun eğitim vermeyi bizlerde amaçlamıştık ancak sizlerde bazen kuralların değiştirilemeyeceğini biliyorsunuz. Bizimde talebimiz reddedilmiş olmasından dolayı böyle yapıldı eğitim. kısıtlı sayıda katılımcı katılması gerektiğinden her okuldan 2 öğretici istendi. Gönderdiğimiz davetiyelerde özellikle branş öğretmenlerinin katılımını rica ettik. Ancak idareler kimleri görevlendirdiyse onlar geldi. Hak verirsiniz ki bizlerin buna müdahele etme şanşsı hiç yoktu. Makinalarda okullarımızın bazı çalışmalarını görüyoruz. Özellikle video çekimlerine bakarak baya yol katedildiği bir gerçek. Gördüğümüz hatalar elbette var. Örneğin yapılan bir program plastik bir malzeme için yapılmış ve başarıya ulaşmışken aynı program metal üzerinde denenmiş ancak aynı başarı sağlanamamıştır. Elbette ki kesicimiz plastiği kestiği gibi metali kesemez. Ona göre (materyale göre) devir , kesme hızı ve derinliği verilmelidir. Ancak çok başarılı okullar olduğu gibi tezgahtan korkan okullarımızda mevcut. Bazı okullarımız bana hediye olarak satranç takımları , top arabaları , gemi dümeni eşantiyonları vb modeller gönderirlerken bazı okullarımızın tezgahı daha yeni yeni kullanmaya başladıklarını görüyorum. Zamanla herşeyin yerli yerine oturacağından hiç şüphem yoktur. Makina ile ilgili takıldığınız herhangi bir durumda bizimle irtibata geçmekten kesinlikle çekinmeyiniz. Unutmayın ki o makinalar sizlerin eğittiği öğrenciler , mühendisler kısacası biz Türk insanları tarafından yapıldı. Lütfen Eleştirilerimizi yapıcı olarak yaparsak , yapılan her eleştiriye bende kendimce cevap verebilirim. Ancak Manasız eleştiriler yapıldığı taktirde bunlara cevap vermem sadece bir kısır döngüne yol açmaktan ileriye gitmeyecektir. Sizlere faydalı olabilmek maksadıyla buradayım. Bu forumu hazırlayanlara teşekkürler ederek daha faydalı kullanabilmek için herkezin burada açıkça yazışmasını diliyorum. İyi çalışmalar dilerim. Saygılarımla Hakan GÜNGÖR |
|
|
|
|
two0426
Yeni Üye
Kayıt Tarihi: 17-Ağustos-2010 Gönderilenler: 4
|
![]() Gönderim Zamanı: 17-Ağustos-2010 Saat 06:25 |
|
The objective of the game+wow gold
wow gold Thinking about the nice Essence of Wintergrasp XP buff and the Stone Keeper's shards when your faction controls this PvP zone, you may be wondering what's now going on in this zone? Portals to Wintergrasp will appear in the Silver Enclave (A) and the Sunreaver's Sanctuary (H) when the battle begins. If the portal is not available, players can also fly into the zone or wait until portals reappear as each faction's Battle-Mages open portals and call out for reinforcements. You'll also see calls in the Trade channel to group up. Being part of a raid group is integral to success in this new battleground. You will flag for PvP and be attackable by the opposing faction once you enter the Wintergrasp zone. wow gold Objective The objective of the game is control of a Titan Relic, which lodges in Wintergrasp Keep, within the Wintergrasp Fortress. Each game has a set time limit, though reports of its length vary. Defenders must protect Wintergrasp Fortress to prevent the enemy from entering the Keep to right-click and channel the Titan Relic to transfer its attunement to their faction. In order to enter the Keep, the attacking forces must destroy the walls and towers of the Fortress and then destroy the door of the Keep. This is accomplished through the use of siege vehicles. wow gold Factories Siege vehicles are manufactured in factories. There are a total of six factories in Wintergrasp. Two are within the Fortress. They cannot be captured, but they can be destroyed. Two factories are in the ring zones right outside the fortress. These can be captured or destroyed. The two other factories, found to the southeast and southwest are like the factories within the fortress and cannot be captured, only destroyed. Cutting off the opposing faction's supply of siege vehicles can be a game changing strategy. A factory is captured just like taking a tower in Eye of the Storm, by destroying all members of the opposing faction and occupying the workshop. Siege vehicles are a new addition to World of Warcraft PvP. They are an absolute necessity for the offense and a vital part of the defense's arsenal. When ready they can be brought into the field. Each factory entitles a faction to four vehicles. Since each faction has two factories, which cannot be destroyed, each side will always have a minimum of eight vehicle slots. This can shift up to sixteen available slots if both the East and West factories are controlled as well. wow power leveling Siege Vehicles There are three types of siege engines which can be deployed. The Wintergrasp Catapult is a fast vehicle, but low on hit points (30k). Its abilities are Plague Barrels, which deal 500 siege damage to a structure and lay down a mist of disease that damages players who stand in it. This vehicle also has a channeled Flame Breath, which damages opposing players to the approximate tune of 1k per tick. One must have a rank of Corporal to build and use this siege engine. wow power leveling The next two vehicles require a rank of First Lieutenant to build. The Wintergrasp Demolisher can carry up to 2 players. One player is the driver. The other slot is for ranged DPS. The passenger can cast and attack as though he or she is standing still. The vehicle itself has two attacks. There is a boulder that can be thrown from a distance. It does about 1k damage to structures. There is also a battering ram effect, which deals about 1500 damage. These are sturdier than the catapults, with around 50k hit points, but they move more slowly. fdhrtyrtuytuihjg louis vuitton handbags The Wintergrasp Siege Engines also requires a rank of First Lieutenant to build. This is the largest vehicle players can build. It deals 2,000 siege damage and can also knock back players and other vehicles. It can carry two passengers, but they cannot cast while in the vehicle. It is a good place for a player who is low on health to take a breather to recover health and mana. They are the slowest of all the vehicles. buy wow gold wow gold dj. |
|
|
|
|
two0426
Yeni Üye
Kayıt Tarihi: 17-Ağustos-2010 Gönderilenler: 4
|
![]() Gönderim Zamanı: 17-Ağustos-2010 Saat 06:26 |
|
More WoW news +wow power leveling
wow power leveling Unlike offense, there's nothing straightforward about defense at all. With the objective being the protection of the Titan Relic for the full forty minutes, staying holed up inside Wintergrasp Fortress is a recipe for disaster. While there are thick walls and long range cannons, it's not going to be enough to push back a concentrated offense. Here, the old adage of the best defense is a good offense applies perfectly. In fact, it is the most effective way to win on Defense. As usual, organization is key. But if you're ungrouped, it's good to know what you must do, anyway. wow power leveling Before the battle, players will be porting to the front of Wintergrasp Keep. If you check the map above, you'll see that most Horde offense will be coming from the West and most of the Alliance offense will be coming from the East, so adjust accordingly. It's always good to send out a regiment to either workshop to prevent the offense from taking control of it. wow power leveling Man your turrets. Turrets are the most powerful weapons at your disposal because of their extremely long range and high damage. Defense with fully-manned turrets will make short work of siege vehicles even before they get to Wintergrasp Fortress, or at least soften them up significantly for players on foot to destroy. Conversely, players must protect their turrets. Kill the ranged DPS first and let the turrets handle the vehicles. A turret firing at a vehicle will kill a vehicle before the vehicle kills the turret every time. The difference-maker are the personnel. Runescape money Again, it's important to head out to mount a counter-offensive. This is the most devastating way to deal with an offense -- destroy their siege workshops. The Eastspark and Westspark Workshops are permanently under offense control, so they should be absolute priority. At the beginning of the game, get Rank and send a fast-striking team of 2-3 Catapults to destroy the workshops. If Eastspark and Westspark Workshops are destroyed, the offense's only recourse is to take control of East or West Workshops. If they are unable to do this, it's game over. Wedding Dresses Understand that only siege vehicles may damage the Fortress walls. If offense has no access to siege vehicles, the game is done, and it's just a matter of winding down the clock. Putting offense on the defensive will disrupt their efforts and buy you time. The ideal result is to stymie their vehicle production completely, but slowing them up enough to delay their Fortress penetration should be worth the effort. Wedding Dresses While it will extremely difficult to stop a coordinated assault, particularly a group on Ventrilo, effort must be made to disrupt them. A coordinated offense can win the game in less than ten minutes, unlocking the currently buggy Within Our Grasp Achievement. The only way to stop them is to block off their vehicle supply at the source, initally the West or East. This where numbers come into play. If they have more, they will simply wrest control. wow gold More WoW news in our world of warcraft gold site: http://www.inwowgold.com By the way,We have done a great number of orders for wow gold and have hundreds of orders for wow power leveling currently. Buy wow gold from our cheap wow gold and world of warcraft power leveling shop here fdhrtyrtuytuihjg If the inner fortress walls have been breached, it's important to fall back into the inner courtyard and take out vehicles before they reach the Fortress Keep Door. Vehicles must take priority. In order of importance, players must take out Demolishers first because of their range, Siege Tanks next because of their heft -- and the only way they'll damage the doors is if they're at close range, and Catapults last because they deal the least siege damage and are easy to destroy. wow gold wow power leveling dj. |
|
|
|
|
two0426
Yeni Üye
Kayıt Tarihi: 17-Ağustos-2010 Gönderilenler: 4
|
![]() Gönderim Zamanı: 17-Ağustos-2010 Saat 06:27 |
|
The objective of the game+wow gold
wow gold Thinking about the nice Essence of Wintergrasp XP buff and the Stone Keeper's shards when your faction controls this PvP zone, you may be wondering what's now going on in this zone? Portals to Wintergrasp will appear in the Silver Enclave (A) and the Sunreaver's Sanctuary (H) when the battle begins. If the portal is not available, players can also fly into the zone or wait until portals reappear as each faction's Battle-Mages open portals and call out for reinforcements. You'll also see calls in the Trade channel to group up. Being part of a raid group is integral to success in this new battleground. You will flag for PvP and be attackable by the opposing faction once you enter the Wintergrasp zone. wow gold Objective The objective of the game is control of a Titan Relic, which lodges in Wintergrasp Keep, within the Wintergrasp Fortress. Each game has a set time limit, though reports of its length vary. Defenders must protect Wintergrasp Fortress to prevent the enemy from entering the Keep to right-click and channel the Titan Relic to transfer its attunement to their faction. In order to enter the Keep, the attacking forces must destroy the walls and towers of the Fortress and then destroy the door wow gold dj. |
|
|
|
|
two0426
Yeni Üye
Kayıt Tarihi: 17-Ağustos-2010 Gönderilenler: 4
|
![]() Gönderim Zamanı: 17-Ağustos-2010 Saat 06:31 |
|
The objective of the game+wow gold
wow gold Thinking about the nice Essence of Wintergrasp XP buff and the Stone Keeper's shards when your faction controls this PvP zone, you may be wondering what's now going on in this zone? Portals to Wintergrasp will appear in the Silver Enclave (A) and the Sunreaver's Sanctuary (H) when the battle begins. If the portal is not available, players can also fly into the zone or wait until portals reappear as each faction's Battle-Mages open portals and call out for reinforcements. You'll also see calls in the Trade channel to group up. Being part of a raid group is integral to success in this new battleground. You will flag for PvP and be attackable by the opposing faction once you enter the Wintergrasp zone. wow gold Objective The objective of the game is control of a Titan Relic, which lodges in Wintergrasp Keep, within the Wintergrasp Fortress. Each game has a set time limit, though reports of its length vary. Defenders must protect Wintergrasp Fortress to prevent the enemy from entering the Keep to right-click and channel the Titan Relic to transfer its attunement to their faction. In order to enter the Keep, the attacking forces must destroy the walls and towers of the Fortress and then destroy the door of the Keep. This is accomplished through the use of siege vehicles. wow gold Factories Siege vehicles are manufactured in factories. There are a total of six factories in Wintergrasp. Two are within the Fortress. They cannot be captured, but they can be destroyed. Two factories are in the ring zones right outside the fortress. These can be captured or destroyed. The two other factories, found to the southeast and southwest are like the factories within the fortress and cannot be captured, only destroyed. Cutting off the opposing faction's supply of siege vehicles can be a game changing strategy. A factory is captured just like taking a tower in Eye of the Storm, by destroying all members of the opposing faction and occupying the workshop. Siege vehicles are a new addition to World of Warcraft PvP. They are an absolute necessity for the offense and a vital part of the defense's arsenal. When ready they can be brought into the field. Each factory entitles a faction to four vehicles. Since each faction has two factories, which cannot be destroyed, each side will always have a minimum of eight vehicle slots. This can shift up to sixteen available slots if both the East and West factories are controlled as well. wow power leveling Siege Vehicles There are three types of siege engines which can be deployed. The Wintergrasp Catapult is a fast vehicle, but low on hit points (30k). Its abilities are Plague Barrels, which deal 500 siege damage to a structure and lay down a mist of disease that damages players who stand in it. This vehicle also has a channeled Flame Breath, which damages opposing players to the approximate tune of 1k per tick. One must have a rank of Corporal to build and use this siege engine. wow power leveling The next two vehicles require a rank of First Lieutenant to build. The Wintergrasp Demolisher can carry up to 2 players. One player is the driver. The other slot is for ranged DPS. The passenger can cast and attack as though he or she is standing still. The vehicle itself has two attacks. There is a boulder that can be thrown from a distance. It does about 1k damage to structures. There is also a battering ram effect, which deals about 1500 damage. These are sturdier than the catapults, with around 50k hit points, but they move more slowly. fdhrtyrtuytuihjg louis vuitton handbags The Wintergrasp Siege Engines also requires a rank of First Lieutenant to build. This is the largest vehicle players can build. It deals 2,000 siege damage and can also knock back players and other vehicles. It can carry two passengers, but they cannot cast while in the vehicle. It is a good place for a player who is low on health to take a breather to recover health and mana. They are the slowest of all the vehicles. buy wow gold wow gold dj. |
|
|
|
|
||
Forum Atla |
Kapalı Foruma Yeni Konu Gönderme Kapalı Forumdaki Konulara Cevap Yazma Kapalı Forumda Cevapları Silme Kapalı Forumdaki Cevapları Düzenleme Kapalı Forumda Anket Açma Kapalı Forumda Anketlerde Oy Kullanma |
|